ExC-3 usb expression controller.

                                                    Menu settings for Opendeck|Pico ExC-3

Open the Menu by downloading the version you need for your operating system from this link.

https://github.com/shanteacontrols/OpenDeckUI/releases

Alternatively  there is an online version of the menu at this link.

 https://config.shanteacontrols.com/#/device/output-1

This page will only open in some browsers.

The menu will open as shown below.

1,  Click on the Analog Button

2,  Click on the Table button

 

       The values shown in the Midi ID boxes show that the  faders are currently set to

CC11, CC1, CC21 from left to right. 

       To change the Midi CC numbers for each fader just change the values in the Midi ID boxes. Any changes you make will be applied straight away 

        (there is no "Save or Apply" button)

Activity Monitor

With the controller connected, check you have the Activity and midi buttons both green.

When you move a fader you will see the midi messages being generated at the bottom of the screen and the Green circle labelled 0,1,2 will blink to show activity of the associated fader.

If everything is works in this activity meter it is time to go back to configuring your DAW.

Any problems please contact me on 

Expressioncontroller@gmail.com